Die Science: The basics of die design, Part I – Choosing a die set

Like a house or a building, a stamping die needs a solid foundation. In my career as a consultant over the last 40 years, I have witnessed a plethora of poor foundations: die sets too thin, poor guide pin selection, poorly fitting dowels. The list goes on and on.

First, we’ll address how to choose the best die set.

What Is a Die Set?
A die set comprises two flat ground metal plates that serve as mounting surfaces for all working die components. Each plate contains either a guide pin or bushing that maintains perfect plate alignment. This alignment is very important because all the working components mounted on the upper and lower plates must interface with proper, precise clearances.

Not all dies use a die set. Larger dies, such as those for cutting and forming automobile hoods, doors, and bumpers, use precisely guided cast-iron foundations rather than metal plates. The cast-iron foundations are designed and cast into custom shapes specific to each part. Features such as a means for handling the die also can be incorporated into the casting.

Most castings are made using the lost Styrofoam method. In this method, a large Styrofoam model of the casting is made, then packed in a hardenable sand mixture. After hardening, molten cast iron is poured into the hardened cast molding, replacing the Styrofoam by disintegrating it. After the cast iron has solidified, the hardened sand mixture is removed, leaving a cast replica of the Styrofoam model.

When more conventional die shoes or plates are used, the die engineer must carefully choose a die set thickness and size. Die sets range in size depending on part size, the force required to cut and form the metal, and the number of cutting and forming stations needed to produce the part. Made of steel or aluminum, they serve as the foundation on which all the working die components are mounted. They must be machined, by milling or grinding, to be parallel and flat within a critical tolerance. Although grinding is the most popular, a milled surface can be obtained that is as accurate as a ground surface.

Read more: Die Science: The basics of die design, Part I – Choosing a die set

Accu-Shape Die Cutting

Accu-Shape Die Cutting

Please submit your Die-Cutting requirements and one of our specialists will contact you!

Request for Quote ×
Request for Quote
Email Call 810 230-2445

Contact Us