Steel Rule Die Cutting

Steel Rule Die Cutting is an efficient way to die-cut a large volume of non-metallic materials. Flatbed die presses are capable of high-precision cuts on materials over 1/8" thick. Accu-Shape is capable of die-cutting any non-metallic material, such as foam, fabrics, paper, corrugate, or rubber. By utilizing our many steel rule presses, Accu-Shape can produce volumes ranging from small runs to large-scale production runs. In addition to die cut presses, Accu-Shape can also apply laminate and pressure sensitive adhesive to parts.

Length

Up to 75″

Width

Up to 80″

Thickness

Up to 2.00″

Quality

Accu-Shape Die Cutting is ISO 9001:2015 certified and adheres to all relevant industry standards.

Cost-Effective

Steel Rule Die Cutting is a money-saving method that allows high volume to be produced with minimal tooling.

Environmentally Responsible

Increase productivity through efficient utilization of resources while reducing waste.

Equipment

Die Cutting Equipment

  • Cuts large safety walk pads for combines and boats

500 Ton Bruno Belt Die Cut Feed Press

Capable of cutting parts as large as 80” x 75”. These presses are used to cut heavy duty material at a fast rate.

Die Cutting Equipment

  • Corrugated Plastic shipping containers & boxes
  • Adhesive strips with felt

350 Ton Bruno Belt Die Cut Feed Press

Capable of cutting parts up to 72” x 60”. Manufactured with all steel fabrication that are stress-relieved.

Die Cutting Equipment

  • Foam shapes for spare tire assemblies
  • Carpet for bath rugs
  • Packaging foams

110 Ton Atom Belt Die Cut Feed
Press

Capable of cutting parts as large as 77” x 52”. This machine is also capable of 20 cycles per minute.

null

  • Able to cut small parts in a roll

Preco 12” x 20“x 20 Ton High Speed Die Cutter

Preco machines can die cut or kiss cut as
needed.  It can provide individual parts or rolls of parts.

null

  • Self adhesive foam and plastic washers for a variety of uses

2-60 Ton Platen
Die
Cutters

Offers an accurate cut with better quality of products than traditional cutting method. Kiss Cut Parts are a specialty.

  • Adhesive Backed Materials
  • Chipboard
  • Cloth
  • Cork
  • Fabrics
  • Felt
  • Fiberglass
  • Foam
  • Foils
  • Neoprene
  • Non-Metallic
  • Non-Wovens
  • Paper
  • Plastic
  • Pressure Sensitive Materials
  • Rubber
  • Silicone
  • Sponge Rubber
  • Textiles
  • Urethane
  • Vinyl
  • Air Filters
  • Bags
  • Belts
  • Conveyor Belts
  • Corrugated Products
  • Decals
  • Electrical Insulation
  • Electronic Parts
  • Film
  • Gaskets
  • Handles
  • Insulation
  • Labels
  • Mats
  • Panels
  • Rubber Goods
  • Tapes
  • Washers
  • Prototype
  • Low Volume
  • Small Run
  • High Volume
  • Large Run
  • Long Run
  • Large Scale Production Volume Run
  • Automotive
  • Packaging
  • Industrial
  • Seating
  • Textiles
  • HVAC
  • Solar
  • Electronics
  • Military
  • Lighting